Pneumatic Linear Actuators Assignment Example | Topics and Well Written Essays - 1500 words

Pneumatic analog Actuators - Assignment ExampleThis pneumatic linear actuator particularly works by moving the barrel forward against the deflect and affirm by from the mold in successive sessions. The linear force applied on the injection piston forces the break up plastic polymer to flow into the sprue hole of the mold where molten thermosetting polymer assumes the shape of the contours of the mold (Malloy, 2004, 41). For example, during the mechanic activity of the machine, the piston in the hollow cylinder is pushed by air causing it to produce goose egg in the form of motion.This is the last pneumatic linear actuator used that operates by opening and closing the mold. The mold cavity then determines the shape of the polymer before the final product is pushed by the linear actuator into the final portray involving the cooling of the product. For example, while the cooling of the already molded product is in progress, Mould Clamp Linear Actuator is used to hold and clamp t he plates of the mold together until the final product cools and hardens into the desired shape. In this regard, the clamping influence is primarily used to determine the finished products final shape.There are a number of inputs and outputs required for a control system that will ensure that to ensure that the injector is always back to its original position.